Custom Horse Drawn Vehicles

 

Moran Farms

 Buggy Shop

 

Carts

 

Home

 

 

All Vehicles are Custom crafted to your specifications and to fit your horse.

These are examples of vehicles I have previously completed.

 

See Custom Vehicles and Options

 

 

Haflinger size Front Entry Road Cart

 

April 2010

 

Double Springs (1 1/4" x 30" 4lf), 1" Short Spindle Axle

Wheels 42", Flush Hubs, Flat Top Rubber, Chrome Hub Caps, Reil Rail and Shaft Tips

Customer supplied leather for Upholstery, Dash and shaft Trim. Cherry Stain, black metal w/Satin finish.

Shaft Trim and lite pin striping, Single Front steps Off Shaft Bar and Spares Box under seat

 

 

Front Entry Road Cart

 

July 2009

 

Again with odds and ends I had around the shop.

It has lights like the one below built for my Arabian/ Haflinger Crosses

It has a slatted floor and box under the seat. Can be make to fit any size horse or Pony.

 

 

 

Buggy Makers Shopping Cart

 

 

May 2008

 

With odds and ends I had around the shop, I finally completed a cart for myself.

It has Head/Tail, Safety Flashers and Halogen lights under the body that illuminate about 40 feet out

front so I can see road conditions a head. Night driving is a must here in the summer.

It has a trunk behind the seat that will hold a weeks worth of groceries

I will provide spec's on this cart at a later point...John

 

Split Seat Road Cart

 

 

Red Oak body and Dash w/English Chestnut stain, Metal Painted Black with Spar Urethane topcoat

Split Seat - Bench Type Seat Back with Spares Box under seat                       

Straight heel shafts, 1" Short Spindle Axle, to make 54 1/2" Track, Wheels 46", Flush Hubs, Flat Top Rubber, Double Springs (1 1/2" x 36" 4lf)     

Upholstered Seats w/Black Martin Naugnahide

Polished Brass Hub Caps, Rein Rail and Whip Holder             

Shaft Trim w/Imitation Patent Leather

Rear step up to floor

 

Pony Country Cart

 

Body of red Oak w/Oak Slatted floor

Phaeton Body Style w/Country cart seat

Pony Straight heel Shafts, Tips to Cross Bar - 66", Shaft Height at Loop - 33", Shaft Width at Loops - 21"

Double Springs (1 1/4" x 30" 4lf), 1" Short Spindle Axle, to make 54" Track

Wheels 38", Flush Hubs, Flat Top Rubber

Chrome Hub Caps, Reil Rail and Shaft Tips

Customer supplied material  for upholstery, paint and stain, Finished w/Spar Polyurethane

Shaft Trim and lite pin striping 

Single Front steps Off Shaft Bar 

Spares Box under seat

 

Country Road Cart

 

This cart is up for Sale

 

Body of red Oak w/Oak Slatted floor, as shown below, Horse Size

5 leaf, 1/2 Elliptical to fit shafts

Single Bend Shaft,

1" Short Spindle Axle, 56 “ Track

Wheels 48" 1 1/4" Rim w/ 1 1/4" Spokes, Flush Hubs, Flat Top Rubber

Brass Rein Rail and Shaft Tips, Dash: Imitation Patent Leather

Upholstery, Black Martin Naugnahide, Fall covered to match

Stained w/Minwax English Chestnut, Finished w/Polyurethane

Front steps Off Shaft Bar, Single Step

Shaft Trim: Imitation Patent Leather

Spares Box under seat

 

Draft Country Road Cart

 

Red Oak Phaeton style body, Oak w/Slated floor

5 leaf, 1/2 Elliptical spring

Draft, Single Bend Shafts

Tips to Cross Bar - 84", Shaft Height at Loop - 47 1/2", Shaft Width at Loops - 32"

Patent Leather Dash with Chrome Rein Rail

1 1/8" Short Spindle Axle, to make 138-140 cm (54.33-55.12") Outside Wheel Measurement

Wheels 50", 1 1/4" Rim w/ 1 1/4" Spokes, Chrome Flush Hubs, Flat/Round Top Rubber

Chrome Shaft Tips and Tug Stops

Upholstery, Bedford Cord Russet, Fall covered to match

Stained w/Minwax English Chestnut stain, finished w/Spar Urethane

Front Entry steps off Shaft Bar

Shaft Trim and pin striping on wheels

Spares Box under seat

 

 

 

Pony Road Cart With Bent Heel Shafts

 

 

Single Bend Hickory Cart Shafts (Pony Size)

Roller Bearing Axle (50” Track), Half Elliptical Spring – 3 leaves

34” Flat Top Rubber Tired Wheels with Flush Hubs

Fold Down Seat Back and Wooden Dash

Upholstered Seat, Black Tiffany Vinyl

Black Leather Shaft Trim

Golden Oak Stain on Wood and Metal Painted Black

 

Fancy Easy Entry Cart

Single Bend Hickory Cart Shafts (Pony Size), Oak floor and Buggy Seat

Roller Bearing Axle (58” Track), Torsion Spring (customer supplied)

30” Flat Top Rubber Tired Wheels with Flush Hubs

Hickory Fenders

14” x 38” Upholstered Buggy Seat, Black Martin Vinyl

Black Leather Shaft Trim

Golden Oak Stain on Wood and Metal Painted Black

Reproduction Lights (Used on Buggies Prior to 1910), Flashing Rear Warning Lights

 

Show Package:Polished Brass Hubs, Rein Rail with Center Supports, Shaft Tips, Whip Holder, Single tree ends and Single Tree Center

 

Breaking Cart

  

Left: Set up for Three a Breast, Right: Single

Easy Entry Cart

 

Phaeton Cart

 

Pony Cart

Sept 1999

10’ Hickory Pony Shafts, Oak floor and seat

Roller Bearing Axles(48" Track), 1 ¼" x 30" 4 leaf Springs

34" Flat Top Rubber Tired Wheels

14" x 34" Upholstered Seat, Dark GreenVinyl with Single Seat

    Back, Tray under seat

Black Leather Shaft Trim

Walnut Stained wood with metal painted Dark Green

Pinstriping in Dark Green with Black stripes on Hubs

Haflinger Meadowbrook

 

May 14, 2000

10 ½’ Hickory Shafts, Oak floor

Roller Bearing Axles(58" Track),  1 ¼" x 36" 4 leaf Springs

40" Flat Top Rubber Tired Wheels, w/Hydraulic Brakes

Oak Fenders

14" x 44" Upholstered Split Seat,  Black Vinyl with Double Back

Black Leather Shaft Trim

Golden Oak Wood with Metal Painted Black, Pinstriping in Black

Pony Cart

Jan. 1, 2000

10’ Hickory Shafts, Pine floor and seat

Roller Bearing Axles(48" Track), Flush Hubs, 

    1 1/2" x 30" 4 leaf Springs

34" Flat Top Rubber Tired Wheels w/Flush Hubs

14" x 28" Upholstered Seat, Black Vinyl with Single 

    Seat Back, Tray under seat

Black Leather Shaft Trim

Red Mahogany Wood with metal painted Black

Pinstriping in Black

 

Miniature Horse Cart

This cart is up for Sale

Sept 15, 1999

8’ Hickory Shafts, Pine floor and seat

Roller Bearing Axles(43" Track), 1 ¼" x 16" 2 leaf Springs

30" Flat Top Rubber Tired Wheels

14" x 28" Upholstered Seat, Black MartinVinyl w/Single Seat Back

Black Leather Shaft Trim

Golden Oak Wood with Metal painted Black 

Pinstriping in Black

 

Road Cart

April 1, 1999

11 ½’ Hickory Shafts, Pine floor and seat

Roller Bearing Axles(58" Track), 1 ¼" x 36" 4 leaf  Springs

40" Flat Top Rubber Tired Wheels

14" x 44" Wagon Seat, Black MartinVinyl with Single Seat Back

Box under seat

Black Leather Shaft Trim

Dark Oak tinted Polyurethane on wood with metal painted Black

Pinstriping in Black with White stripes on Hubs

Show Cart

March 1999

11 ½’ Hickory Shafts,  Aspen floor and seat

Roller Bearing Axles(58" Track), 1 ¼" x 36" 4 leaf Springs

44" Flat Top Rubber Tired Wheels

14" x 44" Upholstered Seat, Yorktown Oxblood Vinyl with     

    matching buttons

Black Leather Shaft Trim accented with vinyl trim

Wood painted Almond and Hardware Burgundy with clear varnish top coats, Pinstriping in contrasting colors

Split Seat Road Cart 

11 ½’ Hickory Shafts, Pine floor and seat

Roller Bearing Axles(58" Track), 1 ¼" x 36" 4 leaf  Springs

48" Flat Top Rubber Tired Wheels

14" x 44" Split Seat, Black MartinVinyl

Black Leather Shaft Trim

Oak wood with metal painted Black

Pinstriping in Black and Forest Green on Hubs

 

Home

 

 

 

John Moran

34214 E. 181st St. South

Porter, Ok 74454

918.486-3594

e-mail: MoranFarms@gmail.com

 

I have changed email accounts, if the above link doesn't work correctly, change the cs.com to gmail.com and let me know.

 

Please mention Horses/Vehicles in subject of e-mails

 

Last Updated: 08/19/10